G Loading Paper In The Stand/1 X 500 Sheet Paper; Drawer/Stand/3 X 500 Sheet Paper Drawer; Stand/3 X 500 Sheet Paper Drawer; Loading Paper In The Stand/1 X 500 Sheet Paper Drawer/Stand/3 X 500 Sheet Paper Drawer - Sharp AR-C260P Operation Manual

1 Unlatch the duplex bypass/inverter unit
and slide it to the left.
2 Lower the two fusing unit pressure adjusting
levers marked A and B in the illustration.
Normal
position
Lower pressure
B:Front side of
posion
fusing unit
Loading paper in the stand/1 x 500 sheet paper

drawer/stand/3 x 500 sheet paper drawer

Upper tray / middle tray / lower tray*
Up to 500 sheets of paper recommended for colour or SHARP recommended plain paper can be loaded in these
trays. The method of loading paper is the same as for paper tray 1 in the main unit (see the explanation on page 2-2).
* The stand/1 x 500 sheet paper drawer only has the upper tray.
NOTE
If the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is different
from the previous type, you must change the paper tray settings in the custom settings. Change the settings as
explained in "Setting the paper type (except for the bypass tray)" on page 2-12 and "Specifying the size when the
paper size is set to "Extra" (except for the bypass tray)" on page 2-13.
Specifications (stand/1 x 500 sheet paper drawer/stand/3 x
500 sheet paper drawer)
Name
Paper size/weight
Paper capacity
Power supply
Power consumption
Dimensions
Weight
Specifications are subject to change for improvement without notice.
Unlatch the unit and
gently move it away from
the machine. If the
machine is not equipped
with a duplex
bypass/inverter unit, open
the side cover similarly.
A
B
A:Rear side of
fusing unit
Stand/1 x 500 sheet paper drawer
See "1-tray or 3-tray paper drawer" in the paper tray specifications (page 2-9)
Paper recommended for colour (80 g/m
SHARP standard paper (80 g/m
32.2 W or less
600 mm (W) x 642 mm (D) x 403 mm (H) (23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H))
Approximately 22.5 kg or 49.5 lbs.
3 Gently close the duplex bypass/inverter
unit.

Stand/3 x 500 sheet paper drawer

2 or 20 lbs.): 500 sheets;
2 or 20 lbs.): 500 sheets
Supplied from the main unit
(not including the adjuster)
Approximately 29.5 kg or 64.9 lbs.
LOADING PAPER
If the machine is not
equipped with a duplex
bypass/inverter unit,
close the side cover.
32.7 W or less
2-7
2