G Structure Of The Bypass Tray Setting Menu; Structure Of The Bypass Tray Setting Menu - Sharp AR-C260P Operation Manual

LOADING PAPER

Structure of the bypass tray setting menu

"BYPASS TRAY PAPER SELECTION" consists of the levels shown below.
To move through the settings on any level, press the [
To select a setting or store a selection for a setting, press the [OK] key.
To move back to the previous level after completing a setting or to cancel the selection of a setting, press the
[BACK/C] key.
To correct an accidental selection, press the [BACK/C] key.
LEVEL1
[OK]
A4
UNKNOWN TYPE
[BACK/C]
[ ] [ ]
BYPASS TRAY PAPER
SELECTION OK?
No paper in
the bypass tray
ADD PAPER ONTO
BYPASS-TRAY
If the type of the paper loaded in the bypass tray is either plain, letter head, pre-printed, pre-punched, recycled
or colour, select "PLAIN" for the bypass tray paper type in LEVEL2 operation.
2-14
] key or [
LEVEL2
If plain or heavy1 or
heavy2 is loaded in the
[BACK/C]
bypass tray, select the
paper type with the
or key.
[OK]
If transparency S or
transparency Q is
loaded in the bypass
tray, select the paper
type with the or key.
If an envelope is loaded
in the bypass tray, select
"ENVELOPE OK?" with
the or key.
] key.
LEVEL3
[OK]
If a standard size of
paper is loaded, select
[BACK/C]
"AUTO SIZE
DETECTION ENABLE"
with the or key.
If a non-standard size of
paper is loaded (see
page 2-9), select "AUTO
SIZE DETECTION
DISABLE" with the or
key.
[OK]
The setting is stored.
[OK]
Select the paper type
with the or key
[BACK/C]
• COM-10
• MONARCH
• C5
• DL
LEVEL4
[OK]
The setting is stored.
[OK]
Set the X dimension and
then the Y dimension of
[BACK/C]
the non-standard size
using the or key,
pressing the [OK] key
after each.
The setting is stored.
[OK]
The setting is stored.