Selecting Features Using Display Menus - Samsung iDCS500 User Manual

Samsung iDCS500
Transfer/Conference Tone—indicates your call is being held and you can dial
another party.
Confirmation Tone—very short beeps followed by dial tone indicate you have
correctly set or cancelled a system feature.
Error Tone—a continuous single-level tone indicates you have done some-
thing incorrectly and should try again.
SELECTING FEATURES USING DISPLAY
n
MENUS
Your keyset's display can be used to select features without the need for
programmed keys. You press the SCROLL key to display feature menus on
the LCD and then use the soft keys to select the required feature(s).
The three soft keys below the LCD are substitutes for dedicated feature keys
and access codes. Pressing one of these keys has the same effect as
pressing a programmed key. These keys are context sensitive and their func-
tions change to present you with the best options for a particular call condi-
tion.
The SCROLL key is used to display options available at a particular time or
during a specific procedure. Press this key once while in the idle state to
view the main feature menus available.
CALL
OTHER
ANS
1. Select one of the main menus, CALL, OTHER, or ANS using the appro-
priate soft key.
201:STN NAME
CALL OTHER
Guides you through the options to make a call.
Guides you through features other than making or answer-
ing calls.
Guides you through the options to answer calls.
DCS (Euro) Keyset User Guide
ANS→
– 4 –