Advanced Programmed Messages - Samsung iDCS500 User Manual

Samsung iDCS500
SETTING A MESSAGE IF NO KEYS ARE
n
PROGRAMMED
§
Dial 48 followed by a message code 01–30.
If you want to select a message indicating that you will be returning to your
desk at a specific time or date, refer to
below.
To Cancel a Message You Have Set
§
Dial 48 followed by 00.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER key before you begin dialling.
ADVANCED PROGRAMMED
MESSAGES
This feature allows you to add an extender such as date or time to selected
programmed messages. For example, RETURN ON:Dec/27 or RETURN
AT:03:30p.
'L' Version Systems
These are messages 26-30. Messages 26 and 27 have default messages
"RETURN AT" and "RETURN ON" (respectively) which allow you to append a
time or date. Messages 28–30 are blank by default but may be programmed
with new messages which also allow you to append a time or date.
'M' Version Systems
These are messages 19-20. By default, these messages "RETURN AT" and
"RETURN ON" (respectively) allow you to append a time or date.
To see what messages have been set up for your system
(both 'L' and 'M' systems):
•
With the handset on-hook, dial TRSF 115
•
Use the VOLUME keys to scroll through the programmed message op-
tions.
DCS (Euro) Keyset User Guide

Advanced Programmed Messages

– 39 –
,