Samsung iDCS500 User Manual page 45

Samsung iDCS500
•
To cancel all message indications left by other users at your key-
set, without replying to them, dial 42 followed by your extension num-
ber. Your MSG key LED will stop flashing.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER key before you begin dialling.
VIEWING, CLEARING AND RETURNING
n
MESSAGES
If your MSG key is flashing, you can view the message waiting indications
before you answer them. There may be up to five indications left at your ex-
tension.
•
With the handset on-hook, press the flashing MSG key. The first station
that left a message waiting indication will be displayed.
•
Press the VOLUME keys or NEXT soft key to scroll through other sta-
tions that left message waiting indications.
•
As you view each indication, you have the choice to REPLY or CLEAR. If
you reply, you will ring the extension displayed. If you clear, the mes-
sage indication is deleted without a reply.
•
Press the ANS/RLS key to return your keyset to the idle condition.
RETURNING MESSAGES WITHOUT
n
VIEWING THEM
To answer message waiting indications at your keyset without first viewing
them:
1. Press the MSG key or dial 43. The first extension that left you a mes-
sage will be called automatically. (If that extension does not answer, your
MSG key LED will continue to flash.)
2. Repeat step 1 until all messages have been returned in the order they
were received.
Your MSG key LED will turn off when all messages have been returned.
Note:
•
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the SPEAKER key before you begin dialling.
•
If a message has been left at your keyset by a keyset in Auto Answer mode,
you must manually cancel the message after it has been returned (see
above).
DCS (Euro) Keyset User Guide
– 37 –