Toro 03540 Operator's Manual page 5

8. Be careful during adjustment of the machine to
prevent entrapment of the fingers between
moving blades and fixed parts of the machine.
9. On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
10. When the machine is to be parked, stored or
left unattended, lower the cutting means unless
a positive mechanical lock is used.
Sound & Vibration Levels
Sound Levels
This unit has a continuous A-weighted sound
pressure level of 88 dB(A), based on measurements
of identical machines per Directive 91/386/EEC and
amendments.
This unit has a sound power level of 101 LWA,
based on measurements of identical machines per
Directive 84/538/EEC and amendments
Vibration Levels
This unit has a vibration level of 1.3 m/s
hands, based on measurements of identical machines
per ISO 5349 procedures.
This unit does not exceed a vibration level of 0.5
m/s 2 at the posterior, based on measurements of
identical machines per ISO 2631 procedures.
Safety
2 at the
5