Positioning The Seat; Headlights; Positioning The Tilt Steering Wheel - Toro 72048 Operator's Manual

Operation

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. Raise the seat and loosen the adjustment knobs
(Fig. 12).
2. Slide the seat to the desired position and tighten
the knobs.
1
Figure 12
1. Adjustment knob

Headlights

The headlights are turned on with a separate position,
"LIGHTS", of the ignition switch (Fig. 13). The
lights are on while the ignition switch is in the
"LIGHTS" position even with the engine off.
Remove the key when the machine is left unattended
so lights can not be turned on discharging the battery.
Figure 13
1. Lights
18
Positioning the
Tilt Steering Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 14).
2. Move the steering wheel to a comfortable
position; then release the lever to lock.
1202
1200
1. Tilt lever
1
1208
1
Figure 14
2. Steering wheel
2
1203b