Product Overview; Controls - Toro 30413 Operator's Manual

Product Overview

1. Traction pedal
2. Brake pedals
3. Pedal locking latch
4. Tilt steering lever
5. Parking brake latch

Controls

Note: Determine the left and right sides of the machine
from the normal operating position.
This machine produces sound levels in excess
of 85 dBA at the operators ear and can cause
hearing loss through extended periods of
exposure.
Wear hearing protection when operating this
machine.
Traction Pedal
The traction pedal (Figure 2) controls forward and
reverse operation. Press the top of the pedal to move
forward and the bottom to move backward. Ground
speed depends on how far you press the pedal. For no
Figure 2
6. Charge indicator
7. Engine oil pressure
warning light
8. Engine coolant
temperature warning
light
9. Glow plug indicator light
10. Temperature gauge
load, maximum ground speed, fully press the pedal while
the throttle is in Fast.
To stop, reduce your foot pressure on the traction pedal
and allow it to return to the center position.
Brake Pedals
Two foot pedals (Figure 2) operate individual wheel
brakes for turning assistance, parking, and to aid in
obtaining better side hill traction. A latch connects the
pedals for parking brake operation and transport.
Pedal Locking Latch
The pedal locking latch (Figure 2) connects the pedals
together to engage the parking brake.
Tilt Steering Lever
Press the lever (Figure 2) down to tilt the steering wheel
to the desired position. Then release the lever to lock
the adjustment.
Parking Brake Latch
A knob on the left side of the console actuates the
parking brake lock (Figure 2). To engage the parking
brake, connect the pedals with the locking latch, push
down on both pedals, and pull the parking brake latch
out. To release the parking brake, press both pedals until
the parking brake latch retracts.
Charge Indicator
The charge indicator (Figure 2) illuminates when the
system charging circuit malfunctions.
Engine Oil Pressure Warning Light
The light (Figure 2) illuminates when the engine oil
pressure is dangerously low.
Engine Coolant Temperature Warning
Light
The light (Figure 2) illuminates and the engine shuts
down when coolant reaches an excessively high
temperature.
Glow Plug Indicator Light
When lit, the glow plug indicator light (Figure 2)
indicates that the glow plugs are on.
15