Specifications; Attachments/Accessories - Toro 38700 Operator's Manual

Wheel-Clutch Levers
The wheel-clutch levers are located below the right and left
handles.
The wheel clutch levers allow the drive to momentarily
disengage to 1 or both wheels with the traction-drive lever
squeezed. This allows for easier turning and maneuvering
the machine (Figure 6).
Note: Squeezing both wheel clutch levers simultaneously
disengages the drive to both wheels (free-wheeling). This
enables you to manually move the machine backward without
stopping to shift it into a reverse gear. It also allows you to
maneuver and transport the machine more easily when the
engine is not running.
1. Wheel-clutch lever
2. Handle
3. Broom-angle lever
Broom-Drive Lever
The broom-drive lever is located above the right handle
(Figure 6).
To engage the broom, squeeze the lever to the handle. To
disengage the broom, release the right lever.
Traction-Drive Lever
The traction-drive lever is located above the left handle
(Figure 6).
The traction-drive lever controls the forward and reverse
motion of the machine. To engage the traction drive, squeeze
the lever to the handle.
Note: Holding down the traction-drive lever against the
handle engages the traction drive to both wheels.
Figure 6
4. Traction-drive lever
5. Speed-selector lever
6. Broom-drive lever
Speed-Selector Lever
The speed-selection lever is located on the main console
panel (Figure 6).
The speed selector has 6 forward and 2 reverse settings. To
change speeds, release the traction-drive lever, and shift the
speed-selector lever to the desired setting. The lever locks in a
notch at each speed setting.
Broom-Angle Lever
The broom-angle lever is located at the right handle
The broom-angle lever controls the angle lock. The broom
angle can be locked into 3 positions: straight ahead, or angled
to the left or right 19°.

Specifications

Width
Length
Height
Weight
Engine speed (no load)

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
10
(Figure
118 cm (46.5 inches)
185.5 cm (73 inches)
105.5 cm (41.5 inches)
146.5 kg (323 lb)
Full speed: 3600 ± 100 rpm
6).