Controls & Features - Cub Cadet RZT-S Zero Operator's Manual

Controls & Features
Reverse Caution
Mode Button
LCD Screen
Dash
Cruise Control
Function
Button
Buttons
NOTE: References to LEFT, RIGHT, FRONT, and REAR indicate that
position on the rider when facing forward while seated in the
operator's seat.
Deck Height Index Bracket
The deck height index bracket consists of eight index
notches located on the front of the RH console. Each
notch corresponds to a 1⁄2" change in the cutting height
ranging from 1-1⁄2" (position 1) to 4" (position 8).
Deck Lift Handle
The deck lift handle is located on the front of the RH console,
it is used to either raise or lower the mower deck to the
desired cutting position.
Pull the handle out of the index bracket to lower or raise the
cutting deck to the desired position. Move the lift handle to
the right until fully engaged in the index bracket.
Headlight
Button
Start/Stop
Steering Wheel
Button
Seat Adjustment Lever
LH Console
Charging Port Cover/
Charging Port
Cargo Box & Cargo Net
Brake
Forward
Pedal
Drive Pedal
Park Brake Lock (Not Shown)
The park brake lock is located at the base of the
steering column. It is used to engage the parking brake
when the rider is at rest. Refer to the Operation section
of this manual for detailed instructions regarding the
park brake lock.
NOTE: The park brake lock must be set if the operator
leaves the seat.
WARNING!
Never leave a powered machine on
and unattended. Always disengage Blade Start/Stop
Knob, stop the rider, set parking brake and remove
key to prevent unintended starting.
4
Reverse Drive Pedal
Deck Lift Handle
Deck Height
Index Bracket
Blade Start/
Stop Knob
RH Console
Key Switch
(Batteries)
Cup Holder
Storage Tray
11