JVC DR-MV1 Instructions Manual page 83

7
View the Confirmation screen.
"SCAN COMPLETED" is
displayed on the TV screen. Press
"OK", then the Confirmation
screen appears. The confirmation
screen lists the channel position
number (PR), station channel
number (CH), and station name
(ID) ( pg. 99) of all stored
broadcast stations. The programme currently received on the
selected channel position appears behind the confirmation screen.
To view the next page, press rt w e.
● The stations located in the selected country appear at the top of the
list.
● The Guide Program numbers will also be set automatically during
Auto Channel Set.
8
Press SET UP to complete the setting.
● Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations. Refer to
pages 83 – 84 for the procedures.
● Depending on reception conditions, the stations may not be stored in
order, and the station names may not be stored correctly.
● For information on scrambled broadcasts, refer to "When Receiving A
Scrambled Broadcast" (
IMPORTANT:
● In certain reception conditions, station names may not be stored
correctly, and Auto Guide Program Number Set may not work
properly. When the Guide Programme numbers are not set
properly, the programme that you do not intended to record will be
timer-recorded by the S
programming the timer using the S
check the desired channel is selected correctly. (
● Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (
NOTES:
● Fine tuning is performed automatically during Auto Channel Set. If
you want to perform tuning manually, refer to "Fine-Tuning Channels
Already Stored" ( pg. 84).
● If you perform Auto Channel Set when the aerial cable is not
connected properly, "SCAN COMPLETED –NO SIGNAL–" appears
on the TV screen in step 7. In such a case, make sure of the aerial
connection and press ENTER; Auto Channel Set will start again.
● If no sound accompanies the picture or the audio sounds unnatural
on some channels that have been stored by Auto Set Up, the TV
system setting for those channels may be incorrect. Select the
appropriate TV system for those channels. (
"INFORMATION")
Downloaded From DvDPlayer-Manual.com JVC Manuals
pg. 84).
V system of the unit. When
HOW IEW
V system, be sure to
HOW IEW
pg. 43, 54)
pg. 84, "Delete A Channel")
pg. 84,
Manual Channel Set
Store channels that were not stored during Auto Set Up
( pg. 17), Preset Download (
( pg. 82).
VCR/DVD
1
4
7
DISPLAY
8
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press ENTER.
3
Press w e to select "MANUAL CH SET", then press ENTER.
The Confirmation screen appears.
4
Press rt w e to select a
blank position in which you want to
store a channel, then press
ENTER twice. The Manual
Channel Set screen appears.
5
Press rt to select "BAND",
then press ENTER.
6
Press rt to change the band
between CH (regular) and CC
(cable), then press ENTER.
7
Press rt to select "CH", then
press ENTER.
8
Press rt to input the channel
number you want to store.
● To enter the registered station
name ( pg. 99), press rt to
select "ID", then press ENTER. Press rt.
● For fine tuning adjustment, press rt to select "FINE", then press
ENTER. Press rt to perform fine-tuning.
● When storing a channel that sends scrambled broadcasts, press rt
to select "DECODER", then press ENTER. Press rt to set
"DECODER" to "ON" ("OFF" is the default setting).
● When "L-2 SELECT" is set to "VIDEO", "S-VIDEO", "SAT VIDEO" or
"SAT S-VIDEO", the "DECODER" setting cannot be changed.
( pg. 72)
9
Press ENTER to enter new channel information. The
Confirmation screen appears.
● Repeat steps 4 – 9 as necessary.
10
Press SET UP to close the Confirmation screen.
● To change positions, see "Change Station Channel Position"
( pg. 84).
● If you wish to set station names other than the ones registered in your
unit, see "Set Stations (B)" (
ATTENTION:
Guide Program numbers are not set when channels are stored
manually. ( pg. 82, "S V
HOW
SUBSIDIARY SETTINGS
EN
pg. 18) or Auto Channel Set
SAT
2 3
5 6
8 9
0
8
DISPLAY
(Example) To store in position 12.
The programme currently
received on the selected channel
position appears behind the
confirmation screen.
pg. 84).
® System Setup")
IEW
83