Table of Contents
Advertisement
OPERATIONS ON VCR DECK
52
EN
Basic Recording
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
VCR/DVD
VCR/DVD
8
REC MODE
1
Load a cassette with the record safety tab intact.
● The unit's power comes on automatically and the counter is reset to
0:00:00.
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press PR +/– or the number keys to select the channel you
wish to record.
4
Press REC MODE repeatedly to set the recording mode.
5
Press 7 on the unit to start recording. Or press and hold 7 and
press 4 on the remote control.
● The VCR recording lamp lights up on the unit.
● If "O.S.D." is set to "ON" (
while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP and the
first LP recording after inserting the cassette. (
If "DIRECT REC" is set to "ON", the programme that appears on
the TV screen will be recorded. (
6
Press 9 to pause recording.
● You can select channel during the Record Pause mode.
● To resume recording, press 4.
7
Press 8 to stop recording.
● The VCR recording lamp lights off on the unit.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
resume automatically when power is restored to the unit unless the
unit's memory backup has expired.
Downloaded From DvDPlayer-Manual.com JVC Manuals
4
7
9
REC MODE
PR +/–
8
SAT
1
2
3
4
5
6
0 – 9
8
7
9
0
4
9
7
PR +/–
pg. 80), "MARK" blinks on the screen
pg. 53)
pg. 81)
pg. 52, 54, 55), the recording will
Recording Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press VCR/DVD repeatedly so that the VCR lamp lights up on the
unit.
VCR/DVD
1
4
7
CANCEL
TV/VCR
Watch Another Programme While Recording On The
Unit
While recording is going on, you can watch another programme on
the TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
pg. 74)
1
During recording, press TV/VCR to select TV mode if your unit
is connected to the TV via the RF connection.
● VCR mode is disengaged, then the VCR indicator lights off and "TV"
appears on the front display panel.
VCR indicator lights off.
● The programme received on the TV's tuner is displayed on the TV
screen.
2
Slide the TV/CABLE/SAT/DVD switch to TV.
3
Press PR +/– repeatedly to select the desired channel.
Accidental erasure
prevention
To prevent accidental recording on
a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
7
SAT
2
3
5
6
8
9
0
DISPLAY
PR +/–
Record safety tab
Hide quick links:
Advertisement
Table of Contents
