JVC DR-MV1 Instructions Manual page 26

OPERATIONS ON DVD DECK
26
EN
REMAIN
2
SLOW– (3)
REMAIN
ANGLE
Still Picture/Frame-By-Frame Playback
1
Press 9 to pause during playback.
2
Press 9 or w e to activate frame-by-frame playback.
● Each press of 9 advances the still picture frame by frame.
● Each press of w e advances/reverses the still picture frame by
frame.
● Frame-by-frame playback for reverse direction cannot be performed
with Video CD/SVCD discs.
● To resume normal playback, press 4.
Slow Motion
1
Press 9 to pause during playback.
2
Press SLOW – (3) or SLOW + (5).
● Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
● Slow motion for reverse direction cannot be performed with Video
CD/SVCD discs.
OR
Press SLOW – (3) or SLOW + (5) for 2 or more seconds.
Skip Search
During playback, press
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Downloaded From DvDPlayer-Manual.com JVC Manuals
SAT
1 2 3
4 5 6
7 8 9
MARK
0
MENU
rtw e
ENTER
6
4
SLOW+ (5)
8 9
SUBTITLE
.
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
● Be sure to set "RESUME" to "ON" or "DISC RESUME". (
1
Press 8 during playback to memorises a resume point.
● The unit enters Resume Stop mode and memorises the position
where you have stopped playback as a resume point. (The inside of
the disc status indicator on the front display panel blinks while
memorising.)
● The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if "RESUME" is set
to "DISC RESUME". ( pg. 79)
● To clear the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When "RESUME" is set to "ON":
• Press 1 to turn off the unit.
• Press x to take out the disc.
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
When "RESUME" is set to "DISC RESUME":
• Set "RESUME" to "OFF". ( pg. 79)
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
2
Press 4 in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
● "DISC RESUME" setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under "ON" setting will be applied even if
"RESUME" is set to "DISC RESUME". (
● If you stop the playback of a disc for which an resume point has
already been memorized, the memory will be updated with the new
resume point.
● After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
● When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not work for some Video CD/SVCD.
● When "RESUME" is changed to "ON" or "OFF" (
points of the discs memorized with "RESUME" set to "DISC
RESUME" will be cleared.
● Resume points are memorized for each side of a double-sided disc.
pg. 79)
pg. 79)
pg. 79), resume