JVC DR-MV1 Instructions Manual page 36

OPERATIONS ON DVD DECK
36
EN
a
CANCEL
ENTER
2
CLEAR (8)
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your
2-channel stereo system.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "
● Above the selected item, "3D-ON" appears and Simulated Surround
Effect is activated.
● Each time you press ENTER, "3D-ON" appears and disappears
alternately.
To clear the on-screen bar
Press ON SCREEN.
To cancel the simulated surround effect
Press ENTER to clear "3D-ON" from the screen.
NOTES:
● The simulated surround effect works correctly only when playing back
a title recorded in multichannels.
● Simulated Surround Effect does not affect the DVD VIDEO bitstream
signal from the DIGITAL AUDIO OUTPUT connector.
● When Simulated Surround Effect is activated, the settings of
"ANALOG AUDIO OUT" and "D. RANGE CONTROL" are disabled.
( pg. 78)
Downloaded From DvDPlayer-Manual.com JVC Manuals
SAT
1 2 3
0 – 9
4 5 6
7 8 9
0
ON SCREEN
rtw e
6
4
", then press ENTER.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select " ", then press ENTER. The pop-up
window appears under the selected item.
3
Press rt to select the desired option, then press ENTER.
NORMAL
: Normally select this option.
CINEMA
: Suitable for a movie disc, etc.
SHARP
: Clearer, sharper-edged picture when viewing images with
lots of flat, same-colored surfaces such as cartoons.
SOFT
: Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.