Computer Telephony Integration (Cti) Features; Computer Telephony Integration (Cti) - Panasonic KX-TDA30 Features Manual

1.31 Computer Telephony Integration (CTI)

Features
1.31.1 Computer Telephony Integration (CTI)
Description
Connecting a PC to a DPT, or connecting a CTI Server to this PBX, enables extension users to make use
of advanced features by using the stored data in the PC or the CTI Server. The features that are available
through CTI depend on the CTI application software used on connected PCs.
There are two types of CTI as follows:
1)
First Party Call Control
2)
Third Party Call Control
1.
First Party Call Control
A PC is connected to a DPT using a USB port (USB Module) attached to the DPT. The PC monitors
the status of the DPT and controls the DPT.
PBX
DPT
2.
Third Party Call Control
A CTI Server is connected to the PBX using the USB port of the PBX or the LAN port of the CTI-LINK
card as a CTI interface. PCs monitor the status of the PBX and control the PBX via the CTI Server.
When a call is received, the CTI Server can be used to decide call routing, and to send information
about the call to the destination extension user's PC. So, for example, if the call is from a customer, that
customer's account information can be shown automatically on the screen of the PC at the same time
as the call is received, depending on the CTI software used. In Third Party Call Control, the PC does
not control extensions directly.
USB
PC

1.31 Computer Telephony Integration (CTI) Features

Feature Guide 333