1.28 Audible Tone Features
1.28 Audible Tone Features
1.28.1 Dial Tone
Description
The following distinctive dial tones inform extensions about features activated on their extensions.
Each dial tone type has two frequencies (e.g., dial tone 1A and dial tone 1B).
Type
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Tone 4A/4B
*: Active even when distinctive dial tones are disabled.
280
Feature Guide
A normal dial tone is heard when:
a)
No features listed for dial tones 2 through 4 has been set, or
b)
ARS is used.
This tone is heard when:
•
There are messages that have previously been listened to and no
new messages on the SVM card.*
•
Any of the features below are set.
•
Absent Message
•
BGM
•
FWD
•
Call Pickup Deny
•
Call Waiting
•
DND
•
Extension Dial Lock
•
Executive Busy Override Deny
•
Hot Line
•
Timed Reminder
This tone is heard when:
•
A called PS is being searched for.
•
The recording time used by the Built-in Simplified Voice Message
feature reaches the limit.*
•
Any of the features below are performed.
•
Account Code Entry
•
Consultation Hold
•
Answering a Timed Reminder call with no message
•
Answering a sensor call
This tone is heard when new messages have been recorded for the
extension.
Description