Sharp AR-FX12 Service Manual page 18

Main code 46
46-12
Purpose Adjustment
Function (Content) Used to adjust the print density in the FAX mode
(all modes). An adjustment with this simulation
affects all the reading density adjustment values.
(Only when FAX is installed)
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX auto adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 0-2, AND PRESS START.
0. TRAY SELECT 1. COPY START
1
50
2. FAX EXP. LEVEL
Select other than 0 - 1,
and press [START] key.
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET),INPUT VALUE 0-99, AND PRESS
START.
2. FAX EXP. LEVEL
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). NOW PRINTING.
Select 0, and
press [START] key.
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5.BPT
1
Press [CUSTOM SETTINGS] key
50
Press [CUSTOM SETTINGS] key
Or copying is terminated.
Press [START] key or
Press [CUSTOM SETTINGS] key
1
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-6
<List of set values 1>
0 Paper feed tray selection
1 Copy start (Default)
2 FAX mode exposure setup
<List of display values 1>
Normal display "NOW PRINTING"
ERROR display DOOR OPEN.
JAM
PAPER EMPTY.
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed