Sharp AR-FX12 Service Manual page 15

Code
Main Sub
66 21 Used to print the FAX information (registrations, communication
management, file management, system errors, protocol).
(Only when FAX is installed.)
23 Used to download the FAX program.
(Only when FAX is installed.)
24 Used clear the FAST memory data.
(Only when FAX is installed.)
25 Used to register the FAX number for MODEM dial-in.
(Only when FAX is installed.)
26 Used to register the external telephone number for MODEM
dial-in. (Only when FAX is installed.)
27 Used to register the voice-warp transfer number.
(Only when FAX is installed.)(Voice-warp:Japan only)
29 Used to clear the Address data.
30 Used to check TEL/LIU status change.
31 Used to set the TEL/LIU status.
32 Used to check received data.
33 Used to check signal detection.
34 Used to measure and display the communication time.
35 Modem program rewriting.(Only when FAX is installed.)
36 Used to check I/F between MFPC and MDMC.
Check is made in the data line or the command line.
39 Registration of FAX destination
42 Used to rewrite the program to the PIC installed in the FAX box.
To execute this simulation, FAX program writing must be
allowed. (Jumper and DIP switch which differ depending on the
model)
43 To execute this simulation, FAX program writing must be
allowed. (Jumper and DIP switch which differ depending on the
model)The adjustment value of PIC are changed and written.
The current setting is highlighted beside the item.
Function (Content)
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-3
Purpose
Adjustment, setup, FAX
operation data output,
check (display, print)
Inhibited FAX
Inhibited FAX
Inhibited FAX
Inhibited FAX
Inhibited FAX
Setup FAX
Setup FAX
Setup FAX
Inhibited FAX
Inhibited FAX
Setup FAX
Operation test, check FAX
Operation test, check FAX
FAX
FAX
FAX
Section Item
Data
Operation
Operation
Operation
Operation
Operation
Operation