Rear Fender, Flair And Tie Down Removal - Polaris 2013 RANGER RZR S Service Manual

BODY / STEERING / SUSPENSION
6. Disconnect all electrical dash components noting their
location and wire routing.
7. Remove the dash assembly from the vehicle.
Front Fender Flair Removal
1. If dash is installed, remove the (2) push rivets that
attach the lower portion of the fender flair to the
rocker panels.
2. Remove the (6) push rivets (RZR) or (8) T27 Torx
screws (RZR-S/RZR-4) and remove fender flairs from
the dash assembly.
Standard RZR Shown
Remove
5.22
Remove
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.

Rear Fender, Flair and Tie Down Removal

1. Remove the rear bumper (see "BODY COMPONENT
REMOVAL - Rear Bumper").
2. Remove the push rivets that retain the rear portion of
the rocker panels to the rear fenders.
3. Remove the (3) push rivets (RZR) or (8) T27 Torx
screws (RZR-S / RZR-4) and remove the fender flair.
Tie-Down
Torx
Screws
Push
Rivets
4. Remove the (3) Torx screws from the bottom side of
the fender and the upper push rivet from the top side.
Remove the fender from the vehicle.
5. Remove the (4) fasteners that retain the tie-down
brackets to the cargo box and remove from vehicle.
Push
Rivet
Fender
Fender
Standard RZR
Flair
Shown