Front Panel Features And Indicators-Poweredge Fx2/Fx2S - Dell PowerEdge FX2 Owner's Manual

Front panel features and indicators—PowerEdge FX2/
FX2s
Figure 6. Front panel features and indicators—PowerEdge FX2/FX2s
Table 2. Front panel features and indicators—PowerEdge FX2/FX2s
Item Indicator, Button, or
Connector
1 System identification
button
2 Enclosure power-on
indicator, power
button
3 Diagnostic indicators
4 KVM select button
5 Sleds
10
Icon Description
The identification buttons on the front and
back panels can be used to locate a particular
system within a rack. When one of these
buttons is pressed, the system status indicator
on the back flashes until one of the buttons is
pressed again.
Press to toggle the system ID on and off.
The power-on indicator turns on when the
enclosure power is on. The power button
controls the power supply output to the
system. For more information, see
Button Functions.
The diagnostic indicators turns on to display
error status. For more information, see
Diagnostic Indicators.
Enables you to map the KVM to the sleds.
PowerEdge FX2/FX2s supports up to:
• four half-width compute sleds, or
• eight quarter-width compute sleds, or
• two full-width compute sleds, or
• four quarter-width compute sleds and
two half-width compute sleds, or
Power