Canon dp-v3010 Instruction Manual page 44

Item
ODT Surround
Color Range
44 OSD Menu
Setting Options (underline indicates factory default)
This is displayed instead of "Gamma" and "Color Gamut" when "Canon Log (select "Color Gamut"
"ACESproxy")" or "ACESproxy" is selected for "Picture Mode".
→
Can be used only when "1.0" is selected for "ACES" under "Compatible Settings".
Dim Surround: E nables Dim Surround process specified by ACESproxy (ACES 1.0).
Dark Surround: Enables Dark Surround specified by ACESproxy (ACES 1.0).
Sets the quantization range.
Automatic: Sets the range based on signal information automatically.
Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limited 1 (16-235): Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 940 (10-bit)/3760 (12-bit)
Limited 2 (16-255): Limits the black range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 1023 (10-bit)/4095 (12-bit)
Note
• When "1.0" is selected for "ACES", under "Compatible Settings", it can be used except when
"ACESproxy" is selected for "Picture Mode" or "ACESproxy" is selected for "Color Gamut".
• Operations when "Automatic" is selected are described below.
-
When DisplayPort is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically
depending on DisplayPort signal information.
-
When SDI is selected, the setting is configured according to the settings for Picture Mode,
Color Gamut, and Gamma.
Picture Mode
DCI-P3
Canon Log, User 1-7 DCI-P3, Cinema
Other than the above Other than the
–
Color Gamut Gamma
–
Gamut to DCI,
DCI-P3+ to DCI
Canon Log,
above Canon Log 2
Other than the
above
Canon Log (HDR),
– Canon Log 2 (HDR),
SMPTE ST 2084
Color Range to be Set
– Full (0-255)
–
Limited 2 (16-255)
Limited 1 (16-235)
Full (0-255)