Table of Contents
Advertisement
Symptom
"Aspect Marker", "Safety Zone Marker" or
"Area Marker" does not appear.
You forgot the password for "Protect
Settings".
The video display does not start up in the
condition that the power was turned off
last time.
92
Troubleshooting
• A channel with no signal, unsupported signal, or with "Input
Configuration" not set may be selected. Check the signal.
• "H Delay" or "V Delay" is turned "On". Set to "Off".
• Not displayed when "Peaking 1" or "Peaking 2" is selected. Set it to
"Off".
• Press the F1 button and the button on the main unit while the video
display is in standby. The configuration will be reset to the state where
no password is set.
• Check the "Power on Setting" on the OSD menu. Set "Last memory"
to start up the video display in the condition that the power is turned off
last time.
Cause and Action
68
59, 63,
64
11
66
Advertisement
Table of Contents
