Nokia Ip40 As Vpn Client; Setting Up The Nokia Ip40 Tele 8 As Vpn Client; Adding Vpn Sites By Using Nokia Ip40 Tele 8 - Nokia IP40 User Manual

14
Working with VPNs
3. Enable a VPN server.
Setting Up SecuRemote
Define your VPN sites as IP40 Satellite X to set up SecuRemote.
For configuring
hybrid mode authentication with RADIUS server see Hybrid mode authentication of Nokia
IP40.doc
Note
While establishing a remote to site VPN between Nokia IP40 Satellite x and securemote
R55/ R56, ensure that IP40 has a VPN certificate installed in the device.
For information about how to configure SecuRemote, see Check Point Desktop Security Guide

Nokia IP40 as VPN Client

The following are supported.
Remote access VPN with another IP40
Remote access VPN with VPN-1
For more information on remote access VPNs, see
164.

Setting Up the Nokia IP40 Tele 8 as VPN Client

You can configure the IP40 Tele 8 as a VPN client.
To enable the VPN client functionality in your IP40 device
If you have subscribed to security services, then connect with your service provider or
enterprise and receive a security subscription.
If you are using the IP40 in a standalone mode, add the license manually.

Adding VPN Sites by Using Nokia IP40 Tele 8

Using Nokia IP40 Tele 8 licenses, you can define only remote access VPN sites. To define site-
to-site VPN gateways, you must have IP40 Satellite X license.
VPN sites represent VPN gateways to which you can connect. You must define VPN sites
before you connect to them.
To add or edit VPN sites
1. Click VPN on the main menu.
The VPN Sites page appears, with a list of VPN sites.
180
remote to site VPN between Nokia IP40 Satellite x and a VPN client using
"Configuring Remote Access VPNs"
Nokia IP40 Security Platform User's Guide v1.1
on page