NEC 140He User Manual page 114

4-42
3.
Select ID-2/3 hard disks.
Same as for Channel-1 for ID-0/1, press Space in the status described in 2 to select Channel-1 for ID-2/3 and
then press Enter to determine the selection. ("ONLIN A02-01/02" is then displayed.)
4.
Set logical drive.
Pressing F10 in the status described in 3 displays a screen shown below. Set each item. Then select "Advance
Menu" to display the "Advanced" sub menu screen.
The setting contents are shown below:
Setting item
RAID
Size
Advanced
Span
– To open the "Advanced" sub menu screen from the "Logical Drive XX" menu screen, select "Advanced
Menu" and then press Enter. Press Esc to move to the "Logical Drive XX" menu screen. In this case, the
cursor moves to "Accept."
Default (initial value)
1
Full capacity (logical drive)
Stripe Size 64 KB
Write Policy WRBACK
Read Policy NORMAL
Cache Policy Direct IO
YES
Setting range
0, 1
Full capacity
2/4/8/16/32/64/128
WRTHRU
WRBACK
NORMAL
READAHEAD
ADAPTIVE
Direct IO
Cache IO
CANSPAN (YES)
NOSPAN (NO)