WIRING
Single-phase 100V class
FR-D710W-008 to 025
Screw size (M3.5)
R/L1 S/L2
Power supply
NOTE
Make sure the power cables are connected to the R/L1, S/L2, T/L3. (Phase need not be matched.) Never connect the
power cable to the U, V, W of the inverter. Doing so will damage the inverter.
Connect the motor to U, V, W. Turning ON the forward rotation switch (signal) at this time rotates the motor
counterclockwise when viewed from the load shaft.
6
N/-
P/+
PR
Screw size
IM
(M3.5)
Motor
FR-D710W-042
N/- P/+
Screw size (M4)
R/L1 S/L2
PR
Power supply
IM
Screw size
(M4)
Motor