Continuous Bar Code Read
Parameter # F1h 89h
Select Enable to allow decode processing to continue until the trigger event ends or the
Timeout on page 4-19
decode processing upon a valid decode as well. This mode does not apply to Presentation Mode .
NOTE Motorola strongly recommends enabling
Mode can cause accidental decodes when more than one bar code is in the decoder's field of view.
*
Disable Continuous Bar Code Read
(00h)
Unique Bar Code Reporting
Parameter # F1h D3h
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when
Continuous Bar Code Read
*
Disable Continuous Bar Code Read Uniqueness
(00h)
occurs. User indications occur upon decoding each bar code. Select Disable to end
is enabled.
User Preferences & Miscellaneous Options 4 - 21
Picklist Mode on page 4-19
with this feature. Disabling Picklist
Enable Continuous Bar Code Read
Enable Continuous Bar Code Read Uniqueness
Decode Session
(01h)
(01h)