Scanning Sequence Examples; Errors While Scanning; Symbology Parameter Defaults - Motorola PL3307 Integration Manual

9 - 2 PL3307 Decoder Integration Guide

Scanning Sequence Examples

In most cases, scanning one bar code sets the parameter value. For example, to transmit bar code data
without the UPC-A check digit, simply scan the Do Not Transmit UPC-A Check Digit bar code under
UPC-A Check Digit on page
a successful parameter entry.
Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes. See the individual
parameter, such as Set Length(s) for D 2 of 5 , for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 9-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
NOTE See
parameters.
Parameter Defaults
Table 9-1
Disable All Code Types
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Bookland ISBN Format
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
9-18. The decoder issues a fast warble beep and the LED turns green, signifying
Set Default Parameter on page
Appendix A, Standard Default Parameters
Parameter
4-5.
for all user preferences, hosts, and miscellaneous default
Parameter
Default
Number
01h Enable
02h Enable
0Ch Disable
04h Enable
03h Enable
53h Enable
F1h 40h ISBN-10
10h Ignore
N/A
F1h 43h
F1h 44h
50h 10
Transmit
Page
Number
9-8
9-9
9-9
9-10
9-10
9-11
9-11
9-12
9-14
9-16
9-16