Check Parity; Stop Bits - Motorola PL3307 Integration Manual

7 - 12 PL3307 Decoder Integration Guide

Check Parity

Parameter # 97h
Select whether or not to check the parity of received characters. Use the Parity parameter to select the type of
parity.
*Do Not Check Parity

Stop Bits

Parameter # 9Dh
The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving (host) device for the next character in the serial data stream. Set the number of stop bits
(one or two) to match host device requirements.
*1 Stop Bit
(00h)
(01h)
Check Parity
(01h)
2 Stop Bits
(02h)