Panasonic DBS 576 Technical Manual page 14

Section 521
DELETE (FF3)
This command deletes the current setting of displayed program lines.
Deletion can be repeated up to 19 lines.
The following screen display shows an example of deletion of line 01.
SEARCH 1,015,010
01:DELETE(LINE)
To Delete Program
Line Data, Press
HOLD Key.
List→
PLAY 2
01:Select FFKey
SEARCH 1,020,010
RET 02,010
PLAY 9
END/DISC
Note:
Note: If you press soft key 10 and select List at any of the above steps, the
List Mode screen is redisplayed.
ALL DELETE (FF6)
This command deletes all settings currently set to all lines in the currently
displayed program.
Program Delete:
DELETE(Program)
To Delete Program
Data, Press 0 and
HOLD Key
List→
END/DISK
01:Select FFKey
14
1. Confirm the specified line to be deleted, and press the HOLD
key.
Example: Line 01 is deleted.
2. The program line that was displayed is deleted, and the List Mode
screen is redisplayed.
When the specified line is deleted, each subsequent program line
is shifted up.
1. Press key 0, and the HOLD key.
2. All of the program that was displayed is deleted, and only the
default END/DISC line is displayed.
DBS 576 (USA) issued March 1999
Built-In ACD Supervisor Guide
576-25-521 (ACD 3.0)