GE CS5500 Programming Manual page 48

Term
Advanced Menu
Alarm Memory
Alarm Restores
Alarm status
Alarms
All Abort
All in Sequence
Alpha-numeric keys
Answer Machine Defeat A call-in option used to defeat an answering machine. There are two types of
Antenna Tamper
Anti-Lock-Up tone
Anti-Lock-Up Tone Time A menu option that sets the interval at which the anti-lock-up tone is sounded at
Definition
A menu option that activates certain options in the Installer menu structure. The
following menus are enabled only if the Advanced Installer menu is enabled.
(Installer)
(i) Zone Types
(ii) Communicator>Format Override
(iii) This keypad>Zone Type Names
(iv) Device/Location Programming
(v) CS7001 GSM Module>Phone Line Cut
(vi) CS7001 GSM Module
A list of alarms and where they occurred. Only the alarms that have occurred
during the last arm/disarm cycle are shown in the alarm memory log.
A menu option that sends a report to the selected phone number when the alarm
has been restored after an alarm. (Phone Numbers)
A menu option that sends a report to the central station when an alarm has been
restored, depending on the condition of the panel dialler. (CS7001 GSM Module)
See also Panel Dialler OK Events and Panel Dialler Not OK Events
The current state of the system. This can be armed, part armed, full armed or
disarmed.
A menu option that sends a report to the central station when an alarm occurs.
(Arm/Disarm/Alarm)
A menu entry that groups together the alarm events that can be selected to trigger
an output. (Event)
A menu option that sends a report to the central station when an alarm occurs,
depending on the condition of the panel dialler. (CS7001 GSM Module)
See also Panel Dialler OK Events and Panel Dialler Not OK Events
A menu option that aborts all on-board communications. Any alarms in the dialler
buffer waiting to be sent to the central station are cancelled.
A menu command that records all CS535 voice module messages in sequence.
The sequence is: Leader message; 15 messages that can be linked to different
types of event (such as, alarms or opening/closing); Kiss off message; Address
message. (Recording)
A menu command that plays back all CS535 voice module messages in
sequence. (Playback)
Keypad keys that are used to enter numbers, text and symbols to the control
panel.
Answer Machine Defeat (AMD):
1. CS534 listen-in module: A telephone call is made to the premises and is
answered by an answering machine or other device. If tone-sniff AMD is
enabled, only one call is required to defeat the answering machine. The
computer calls the panel as normal. When the answering machine
answers, the panel hears the tones from the modem and seizes the phone
line for a download.
2. Control panel: If two-call AMD is enabled, two telephone calls are required
to defeat the answering machine. On the first call, the phone rings once or
twice. The control panel detects the rings and starts a 45-second timer.
During this timer, the control panel answers the next call on the first ring.
This is not recommended for commercial applications.
A menu option that sends a report if the antenna on the selected RF receiver is
removed or damaged (cut).
A tone that sounds at the central station every few seconds during a two-way
session. During this tone the control panel disables the microphones so that it can
detect a key press from the central station. This is useful in a noisy environment to
prevent a loss of central station control.
the central station.