Table 18 Cs320 Power Module Output Events - GE CS5500 Programming Manual

*
# Event
Alarms
17 Alarm Memory
Tests
3 Dyn Battery Test
Tampers
25 Fire LED
11 Smoke Det Reset
8
Over-current
9 Box Tamper
10 Siren Tamper
26 Fire Trouble
1 Mains Failure
2 Low Battery
See Schedule Times>Opening and Schedule Times>Closing/Autoarm.
If set to latched condition, these events are one second
Events 46 and 47 require RX8w8, RX16w8, RX32w8, RX8i4, RX16i4, or RX48i4
wireless receivers to operate.
Events 48, 49 and 50 arm or disarm the CSx75 at the open (disarm) or close
(arm) time for the appropriate schedule.
For events 48 and 50, the keypad buzzer will sound one minute prior to auto
arm if the zone value is 1. If the zone value is 0, the keypad will not sound prior
to auto arm.
# Event
Arm/disarm
21 Armed
22 Disarmed
23 Ready to Arm
18 Entry
19 Exit
20 Entry or Exit
24
Not Ready to Arm
Sirens
12 Burglary Siren
13 Fire Siren
14 Any Siren
15 Fire Sir Steady
16 Any Sir Temporal

Table 18 CS320 power module output events

.
# Event
Misc
32 Code Entry
7 Program Mode
0 Always On
Keypads
29 Keypad Fire
30 Keypad Medical
31
Keypad Panic
28 Keypad Beeping
27 Chime
Communications
4 Listen-in
5 Line Seizure
6 Phone Line Fault