Dual Reporting - GE CS5500 Programming Manual

Level 1 Level 2
Account Code Phone Number 1
Phone Number 2
Protocol Phone Number 1
Phone Number 2
Events Phone Number 1 – Alarms
Phone Number 1 – Alarm Restores
Phone Number 1 – Tampers and Restores
Phone Number 2 – Alarms
Phone Number 2 – Alarm Restores
Phone Number 2 – Tampers and Restores

5.5.3 Dual reporting

Dual reporting configures the control panel to report to two different central stations.
Events must be reported to both phone numbers. The control panel dials the first number
twice. If it cannot reach this number, it dials the second number twice. It performs this
sequence for the number of times specified in ARC Dial Attempts or until it reports the
events to both numbers. The same account code is used to report to both numbers.
Events for phone number 1 are enabled by default and events for phone number 2 are
disabled by default.
Level 1 Level 2
Phone Number Phone Number 1
Phone Number 2
Account Code Phone Number 1
Phone Number 2
Protocol Phone Number 1
Phone Number 2
Events Phone Number 1 – Alarms
Phone Number 1 – Alarm Restores
Phone Number 1 – Tampers and Restores
Phone Number 2 – Alarms
Phone Number 2 – Alarm Restores
Phone Number 2 – Tampers and Restores
Value State
445566
445566
SIA
SIA
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Value State
123456
456789
445566
445566
SIA
SIA
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled