Table of Contents
Advertisement
11
Trouble-shooting
The machine does not switch on.
• Front panel not completely closed.
• No electricity.
The coffee does not come out or
only comes out in slow drips.
• Lack of water in the tank.
• Coffee grind too fine.
• Coffee Machine pipes obstructed.
The coffee comes out too fast and
is not creamy.
• Coffee grind too coarse.
• Coffee too old.
• Coffee blend.
The milk froth does not form.
• Check that the flow of steam is
suitable.
Loud noise of the pump when
dispensing.
• Lack of water in the tank.
• Insufficient pressure in the filter holder
due to a coarse grind.
Auto-diagnostics
The electronic circuits manage
and recognize various alarms and
operating anomalies.
These are indicated as flashing on the
display panel
1. With the machine on:
Technical service
Solution: Before calling in the technical
service, try opening and re-closing the
machine.
2. With the machine on:
Water pressure
Solution: Check the water tank and
turn the switch on the left side off. Turn
the machine back on until the alarm
disappears.
3. With the machine on:
Grinder
Solution: Check for the presence of
foreign bodies in the grinder (stones,
impurities, other foreign bodies).
Turn the grind adjustment knob anti-
clockwise (coarse grind) all the way.
Remove any impurities by running
the grinder for a few seconds. Then
re-adjust the grind to the previous
position.
For any other operating anomaly,
contact your nearest service
center.
24
EN
Advertisement
Table of Contents
