Table of Contents
Advertisement
2. Remove the machine from the base
by unhooking it from the lateral
guides using the levers (Fig. 3). raising
the lever of the right-hand guide and
lowering the lever of the left-hand
guide (1).
3. Slide the base of the machine into
the unit all the way back (2).
4. Attach the base to the shelf using the
10 holes and the screws provided
(Fig.4).
Note : If the sides of the base are not
flush with the sides of the unit, use
the shims provided (3).
5. Close the machine guides all the
way.
6. Connect the plug to the power outlet
following the safety regulations in
force. Important: The power outlet
must be accessible after the machine
has been installed.
7. Insert the machine in the unit, taking
care that the machine guides are
correctly inserted in the guides on
the base, and slide the machine
in leaving the necessary space for
reaching and connecting the power
plug.
8. Close the machine by sliding it all the
way back.
9. Fill the water tank and the coffee
container.
10. Supply power to the machine using
the main switch situated on the left
side of the machine (page 3 Fig. 18)
The manufacturer declines any
responsibility towards persons or
objects, as well as for the proper
operation of the machine, due to
failure to follow the instructions
given above.
11
EN
Advertisement
Table of Contents
