Operation And Use; Programming The Machine; Automatic Switch-On - Blomberg CEA 2211 X Instruction Manual

7

Operation and use

Switch-on
Switch the machine on using the key
After a few seconds, the following
message appears on the display panel:
Welcome message
During the heating phase, the words
COFFEE and WATER flash. The
machine is ready for use only when
they have stopped flashing.
The display also shows the type of
coffee selected (short/medium/ long)
as well as the choice of making one or
two coffees at the same time.

Programming the machine

Various functions can be adjusted and
programmed, as indicated below:
To enter programming mode, with
the machine off press the key
seconds until the display panel shows:
Use the keys
functions to be programmed, which
are, in order of appearance:
.
Pressing the key
panel shows:
Use the keys
Initially the two digits related to the
hour flash.
After setting the hour, press the key
The two digits related to the minutes
flash. Set the minutes by pressing the
keys

Automatic switch-on

Press the key
panel shows:
Use the keys
for 3
you want the machine to switch on
automatically.
Automatic switch-on can be activated
or de-activated by pressing the key
(with the machine off). The display will
to select the
show an * next to the time
16
EN
to set the hour.
.
.
and the display
to set the time
the display