Toro Groundsmaster 4000-D Service Manual page 176

Cutting Deck Lift/Lower Circuit
RIGHT
FRONT
1
1. Front lift cylinder (2 used)
2. RH lift cylinder
Figure 108 illustrates the components that are used in
the Groundsmaster 4000--D and 4010--D cutting deck
lift and lower circuits. Procedures for removal, installa-
tion and disassembly/assembly of these components
are provided on the following pages of this section.
Hydraulic System
5
3. LH lift cylinder
4. Fan drive manifold
6
1
Figure 108
Make sure that cutting decks are fully lowered
before loosening any hydraulic lines, cartridge
valves or plugs from lift circuit components. If
decks are not fully lowered as components are
loosened, decks may drop unexpectedly.
Page 4 - - 138
2
4
3
5. Lift/lower manifold
6. Oil filter
WARNING
Groundsmaster 4000--D/4010--D