Toro Groundsmaster 4000-D Service Manual page 140

Traction (Flow Divider) Manifold Service
50 ft- -lb
(67 N- -m)
20 ft- -lb
(27 N- -m)
198 in- -lb
(22.4 N- -m)
10
20 ft- -lb
(27 N- -m)
5
198 in- -lb
(22.4 N- -m)
20 ft- -lb
(27 N- -m)
40 ft- -lb
(54 N- -m)
1. Flow divider valve
2. Pilot directional valve
3. Orifice (0.020)
4. Traction manifold
NOTE: The ports on the traction manifold are marked
for easy identification of components. Example: P2 is
the gear pump connection port and CD is the connection
for the case drain from the deck motors (see Hydraulic
Schematic in Chapter 10 -- Foldout Drawings to identify
the function of the hydraulic lines and cartridge valves
at each port).
Hydraulic System
1
5
10
5
6
Figure 77
5. Check valve
6. SAE #8 plug with O- -ring
7. Solenoid coil
Page 4 - - 102
50 ft- -lb
(67 N- -m)
2
4
40 ft- -lb
(54 N- -m)
6
3
10
8. Nut
9. Solenoid cartridge valve
10. SAE #6 plug with O- -ring
Groundsmaster 4000--D/4010--D
FRONT
UP
20 ft- -lb
(27 N- -m)
5 ft- -lb
(6.7 N- -m)
9
7
8
198 in- -lb
(22.4 N- -m)