Valve Clearance - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
INSTALLATION
Install the spark plugs by hand and tighten them to
the specified torque with the spark plug wrench.
TORQUE: 16 N·m (1.6 kgf·m, 12 lbf·ft)
Install the spark plug caps.
Install the removed parts in the reverse order.

VALVE CLEARANCE

INSPECTION
Check the engine idle speed (page 5-90) after the
valve clearance inspection.
Remove the cylinder head cover (page 8-6).
Inspect and adjust
the valve clearance
Remove the cam chain tensioner lifter sealing bolt
while the engine is
and sealing washer.
cold (below 35 ° C/
95 ° F)
Turn the cam chain tensioner lifter shaft fully in
Failure to release
(clockwise) and secure it using the special tool to
the cam chain
prevent damaging the cam chain.
tensioner will result
in inaccurate valve
TOOL:
clearance reading.
Tensioner stopper
email: info@motomatrix.co.uk
070MG-0010100
SPARK PLUG WRENCH
BOLT CAM CHAIN TENSIONER LIFTER
SEALING WASHER
STOPPER TOOL
MAINTENANCE
SPARK PLUG
3-9