Antenna Height; Figure 4-26 Standoff Bracket; Figure 4-27 Antenna Heights - Motorola 2.1 Networking Setup Manual

Chapter 4: Site Selection and Deployment Guidelines
Figure 4-26

Antenna Height

It is important to consider device height. For optimal performance, devices should be mounted at similar
heights. Large height mismatches will result in nearby devices not seeing each other. This can produce
additional mesh hops which may be undesirable. In Figure 4-27, traffic from Wi-Fi clients connecting to
the MWR on pole 1 will have to hop through the MWR on pole 2 to reach the IAP on building A.
Figure 4-27
Building A
Standoff bracket
Antenna Heights
Pole 1
4-18
Pole 2