Procedure 2-6 Installing Certificate Services; Procedure - Motorola 2.1 Networking Setup Manual

Chapter 2: Network Setup
The following section details how to set up Windows 2003 Server to provide certificate
services.
credentials in support of Secure Mesh.
Procedure 2-6 describes how to install certificate services in a Microsoft Windows 2003
Server.

Procedure 2-6

Installing Certificate Services
Add the Certificate Services and the IIS windows component.
1
Assuming that the permanent hostname and domain registration of the server selected to
provide certificate services has already been set, perform the following steps to begin
installation:
• Open Settings / Control Panel and select Add/Remove Programs.
• Open the Add/Remove Windows Components dialog window and add the
Certificate Services and Application Server (IIS) components. Read the note about
not being able to change hostname or domain registration and click Yes to confirm.
Create a stand-alone root CA.
2
• Click Next until the "CA Type" dialog box appears.
• Choose Stand-alone root CA and click on Next.
Enter CA information.
3
Enter all of the requested identifying information for the CA. It is highly recommended, but not
required, to complete all fields. The default five year certificate validity period specified at the
bottom of the dialog is sufficient for most deployments. In our reference design we chose a
common name of radius.
Complete the installation.
4
The default settings are valid on all remaining dialog boxes, simply press Next to continue until
you are prompted for the Service Pack 1 CD-ROM. Insert the Disk 1 of the Windows 2003 R2
installation media into the CD-ROM and click OK.
Digital certificates are required in order to exchange and/or validate security
.
.
2-25