Motorola Communications Gateway User Manual page 56

Introduction Before You Begin
Home Print
Installation & Configuration
Wall Mounting, continued
To mount your Communications Gateway on the wall:
1
Print the
Click the Print icon or choose Print from the File menu to display the Print dialog box.
(The example at left is from Adobe
there may be slight differences in your version.)
Be sure you print the template at 100% scale. Be sure Fit to page is not checked in
the Print dialog box.
Click the OK button to print the template.
2
Measure the printed template with a ruler to ensure that it is the correct size.
3
Use a center punch to mark the center of the holes.
4
On the wall, locate the marks for the mounting holes.
Warning
5
Drill the holes to a depth of at least 3.8 cm (1
X
Exit
Troubleshooting
Wall Mounting Template on page 53:
®
Acrobat
Before drilling holes, check the structure for potential damage to water,
gas, or electric lines.
51
Communications Gateway User Guide
FAQ Glossary
License
® ®
Reader running on Windows 2000;
1
/ inches).
2