Communications Gateway User Guide; Setting Up A Usb Driver In Windows Xp - Motorola Communications Gateway User Manual

Introduction Before You Begin
Home Print
Installation & Configuration

Setting Up a USB Driver in Windows XP

Be sure the Motorola Communications Gateway CD-ROM is inserted into the CD-ROM
drive before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard window is displayed.
1
Be sure "Install the software automatically" is selected.
2
Click Next.
3
Click Finish to complete the installation.
When you have successfully finished setting up the USB driver, you can continue with
"Configuring TCP/IP in Windows 2000 or XP"
X
Exit
Troubleshooting
Although your Motorola Communications Gateway model
number may be different than in the images in this guide, the
procedure is the same.
31

Communications Gateway User Guide

FAQ Glossary
on page 36.
License