Setting Up A Usb Driver In Windows 2000 - Motorola Communications Gateway User Manual

Introduction Before You Begin
Home Print
Installation & Configuration

Setting Up a USB Driver in Windows 2000

Be sure the Motorola Communications Gateway CD-ROM is inserted into the CD-ROM
drive before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard welcome window is displayed.
1
Click Next.
2
Be sure "Search for a suitable driver for my device" is selected.
3
Click Next.
X
Exit
Troubleshooting
Although your Motorola Communications Gateway model
number may be different than in the images in this guide, the
procedure is the same.
26
Communications Gateway User Guide
FAQ Glossary
License