Before You Begin - Motorola Communications Gateway User Manual

Introduction

Before You Begin

Home Print
Installation & Configuration
Before You Begin
Before you begin the installation, check that you received the following items with your
Motorola Communications Gateway:
Item
Power cord
10/100Base-T
Ethernet cable
USB cable
Phone wire
Motorola
Communications
Gateway CD-ROM
You will need 75-ohm
Communications Gateway to the nearest cable outlet. If a TV is connected to the cable
outlet, you may need a 5 to 900 MHz RF
Communications Gateway. Both the coaxial cable and the RF splitter are readily
available at consumer electronic stores.
X
Exit
Troubleshooting
Description
Connects to the AC electrical outlet
Connects to the
Connects to the
Connects a telephone line
Contains the User Guide, USB driver, and other
items supporting your Communications Gateway
coaxial cable (coax) with F-type connectors to connect your
splitter
7
Communications Gateway User Guide
FAQ Glossary
Ethernet port
USB port
to use both the TV and the
License