Initial Settings - Mitsubishi Electric GB-50ADA-A Installation Instructions Manual

7 Initial settings

Initial setting procedures
Steps
IP address of the GB-50ADA/Network
Default settings:
1
IP address
Subnet mask
Gateway address
License number registration
2
M-NET address setting for GB-50ADA
Default: 00
3
Normally requires no setting changes.
Functions
4 (Operation prohibit range setting, external input
mode etc.)
Group
5
Interlocked ventilation
6
Clock setting
7
Other settings(Schedules etc.)
8
Test run
9
Internal layout of the GB-50ADA
Switch Board
M-NET Board
TB3
Setting items
192.168.1.1
255.255.255.0
0.0.0.0
MAIN Board
TB1
Switch on the GB-50ADA
Refer to section 7-1 "IP address and
network settings."
Refer to section 9 "Test run"
- 19 -
setting
Web browser
Refer to section 7-1 "IP address and
network settings" and the manual for
Initial Settings.
Refer to the manual for Initial Settings.
Refer to the manual for Initial Settings.
Refer to the manual for Initial Settings.
Refer to the manual for Initial Settings.
Refer to the manual for Initial Settings.
Refer to the manual for Initial Settings.
Refer to the manual for Initial
Settings and for System
maintenance engineer.
Refer to the manual for Initial
Settings and for System
maintenance engineer.
SW602
Quick IP address setting switch
: Settable