Yamaha DRX-2 Service Manual page 77

Nucleus Name DS_SYS_AudioLoopThroughStart
Nucleus Number 1230
Description Description: The audio input is routed from the an input to all outputs. Input is set with the
routing nucleus 1113. All outputs are enabled.
Technical -
-
Execution Time 1second buffer time and 30 seconds playing.
User Input None.
Error Number
123000
123001
123002
123003
123004
Example DS:> 1230
123000:
Test OK @
Nucleus Name DS_SYS_AudioLoopThroughStop
Nucleus Number 1231
Description Stop routing the audio input to all the outputs
Technical -
Execution Time Less than 1 second.
User Input -
Error Number
123100
123101
123102
Example DS:> 1231
123100:
Test OK @
Electronic Program Guide Board (EPGB)
Nucleus Name DS_EPGB_VersionGet
Nucleus Number 1300
Description Returns the version of the EPG board.
Technical -
-
Execution Time 3 seconds.
User Input None
Error Number
130000
130001
130002
130003
130004
Example DS:> 1300
130000:
Version : 6.1.9
Test OK @
Encode the audio to AC3 in memory
Decode the AC3 in memory to audio on the outputs
Description
AudioLoopthroughStart succeeded
Resetting the audio decoder failed
Resetting the audio encoder failed
Encoding the audio failed
Decoding the audio failed
Send the 'Mute' command to the audio decoder
Description
AudioLoopthroughStop succeeded
Resetting the audio decoder failed
Resetting the audio encoder failed
Issue the command to get the version of the EPG board to the analog board
Return the received information to the user
Description
Getting the version succeeded
Communication with the analog board failed.
Communication with the epg board failed.
There was no response from the analog board.
No DS errCode known for analog board error.
DRX-2
77