Yamaha DRX-2 Service Manual page 59

Nucleus Name DS_ANAB_ClockAdjust
Nucleus Number 1116
Description Set the clock to the value passed through in the YYYY MM DD HH MM SS format
Technical Send command P_DS_ANACOM_CLOCK_ADJUST with parameters to the analog board
and read back the result
Execution Time Less than 1 second
User Input <YYYY> <MM> <DD> <HH> <MM> <SS>
Error Number
111600
111601
111602
111603
111604
Example DS:> 1116 2002 11 11 11 11 11
111600:
Test OK @
Nucleus Name DS_ANAB_ClockReference
Nucleus Number 1117
Description Generate a 1 kHz signal on pin 7 (INT) of the clock IC
Technical Send command P_DS_ANACOM_CLOCK_REFERENCE with no parameters to the analog
board and read back the result
Execution Time Less than 1 second
User Input None
Error Number
111700
111701
111702
111703
Example DS:> 1117
111700:
Test OK @
Nucleus Name DS_ANAB_ClockCorrection
Nucleus Number 1118
Description Store the clock IC correction value in NVRAM
Technical Send command P_DS_ANACOM_CLOCK_CORRECTION with parameters to the analog
board and read back the result
Execution Time Less than 1 second
User Input The correction value for the clock
Error Number
111800
111801
111802
111803
111804
111805
Example DS:> 1118 1000023
111800:
Test OK @
Description
Adjusting the clock succeeded
Adjusting the clock failed
The user provided wrong input
There was an error communicating with the analog board
The analog board returned an unexpected result
Description
Generating the signal on the designated pin succeeded
Generating the signal on the designated pin failed
There was an error communicating with the analog board
The analog board returned an unexpected result
Description
Storing the correction value for the clock in NVRAM succeeded
Storing the correction value for the clock in NVRAM failed
Value out of range: default value stored
The user provided wrong input
There was an error communicating with the analog board
The analog board returned an unexpected result
DRX-2
59