Yamaha DRX-2 Service Manual page 46

DRX-2
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
46
DS_BE_MotorOff
916
Turn off the turntable motor
- Send the TURN_TABLE_MOTOR_OFF command
Less than 1 second
None
Number Description
91600 Turn table motor is off
91601 There was a time-out while communicating
91602 The DVDR Mechanism returned an unexpected result
91603 The BE returned an error code
91604 No acknowledge received from BE
91605 Communicating with the DVDR Mechanism failed
91606 Unable to enter service mode
DS:> 916
091600:
Test OK @
DS_BE_RadialOn
917
Close the radial loop
- Send the TRAY_IN command
- Send the READ_TOC command
- Send the RADIAL_COMMAND command with parameter 0x00 0x01
Approximately 10 ñ 15 seconds
A formatted DVD must be loaded into the DVDR Mechanism before executing this nucleus
Number Description
91700 Radial loop is close
91701 There was a time-out while communicating
91702 The DVDR Mechanism returned an unexpected result
91703 The DVDR Mechanism returned an error code
91704 No acknowledge received from BE
91705 Unable to send tray in
91706 Unable to read the disc
91707 No disc is loaded
91708 Unknown disc is loaded
91709 Unable to enter service mode
DS:> 917
091700:
Test OK @