Table of Contents
Advertisement
2
Unpacking
To unpack
the SFX-11:
1.
2.
3.
4.
5.
6.
7.
Open the carton.
Remove the accessories
(handset,
recording
paper roll, etc.) from the carton.
Remove the fax machine
along with the foam braces on both sides.
Remove the polyethylene
wrapping
around the fax machine.
Remove the transportation
tapes.
Save the carton and the foam braces for later storage and/or shipping.
Place the machine
where there is access to an AC outlet and a modular
phone jack. (Be sure to observe the
precautions
below.)
Placement
precautions
Avoid placing
the SFX-11 in humid or dusty places, or in places where it will be exposed
to excessive
heat
(direct sunlight,
heaters, etc.).
Do not step on, or set anything
on, the AC cord. DAMAGE TO THE AC CORD IS A SAFETY
RISK AND CAN
CAUSE A FIRE.
Install the unit only on a stable surface.
Do not connect
the SFX-11 to the same AC outlet as appliances
that generate
large amounts
of interference
(heaters
with thermostats,
appliances
with
motors,
etc.). It is best to use a completely
separate
electrical
outlet.
Keep the SFX-11 away from water. If water accidentally
enters the unit, unplug the AC power cord immediately
DO NOT SWITCH THE UNIT ON AGAIN. Contact an authorized
Sanyo service center or dealer.
Handling
precautions
Do not remove any parts that are held in place with screws. (The SFX-11 does not contain any user-serviceable
items).
Maintain
standard
room temperature
5°C – 35 °C(410F – 95°F) during
use. Do not subject
the unit to shock or
vibration.
Do not move the unit while it is in use.
A rapid increase
in room temperature
in cool weather
can cause condensation
to form inside the unit. If this
happens, wait at least 15 minutes after turning the unit on before attempting
to operate it. Failure to do so may
result in paper jams and/or poor print quality.
When cleaning
the cover or operation
panel of the unit, wipe gently
using a damp cloth to which
a small
amount of a neutral detergent
has been added. NEVER USE SOLVENTS OR CHEMICALLY
TREATED CLOTHS.
—
Advertisement
Table of Contents
