Chapter 4 Supported Software; Via Hardware Monitor; Onboard Lan Drivers For Windows; Graphics Drivers - Mitsubishi Electric CM33-TL User Manual

Mc series

Table of Contents

Supported Software

(included on CD shipped with unit)

The system board comes with the VIA Hardware Monitor utility available on the

CD that was provided with your unit. It is capable of monitoring the system's

hardware conditions such as the temperature of the CPU and system, voltage,

and speed of the CPU and chassis fans. It also allows you to manually set a

range to the items being monitored. If the values are over or under the set

range, a warning message will pop up. The utility can also be configured so

that a beeping alarm will sound whenever an error occurs. We recommend

that you use the "Default Setting" which is the ideal setting that would keep the

system in good working condition.

Note: Use this utility on in Windows

operating systems.

To install the utility, insert the CD into a remote disk drive. Download the VIA

Hardware Monitor Utility.

The onboard LAN drivers included on the CD do not support "Autorun". Once

the system has detected the Realteck RTL8100 fast ethernet controller, it will

prompt you to install the driver for the operating system you are using. The

drivers are in the RTL8100 root directory of the CD.

MAN-0CM33-001

Insert the CD that came with the computer into a remote disk drive.

Click VIA VGA Driver.

Follow the prompts on the screen to complete installation.

Restart the system.

MC Series Computer Products

4 SUPPORTED SOFTWARE

95/98/98SE/ME/2000/XP or NT 4.0

Table of Contents